Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Shepherdsville, KY
Chimney inspection in Shepherdsville starts with one fact: most of the flues here burn real wood, not gas. This is a solid-fuel town, and the homes that call us range from old brick farmhouses with clay tile liners to 1990s rural subdivisions with factory-built metal chimneys to manufactured homes on acreage lots. That mix changes what we look for on every roof. One call covers the full chimney here – inspection, sweeping, and repair – because the flue that needs a look today also needs the sweep booked before October. Call (855) 473-9926 and we’ll set it up.
Why Shepherdsville Homes Are Different
Shepherdsville sits in Bullitt County along the Salt River, and the housing stock tells you most of what the chimney work looks like before we climb the roof. Older brick farmhouses and ranch homes near downtown and the 40165 corridor still have their original exterior masonry chimneys with clay tile liners – good bones, but decades of weather on the crown and mortar joints. Rural subdivisions built from the 1990s through the 2010s more often carry factory-built metal chimneys, plus a fair number of manufactured homes on acreage lots where a wood stove ties into an existing fireplace or runs on its own flue.
The Ohio Valley climate does its part. Humid summers, freeze-thaw winters, and heavy spring storms work on exterior masonry faster than most homeowners expect, and chimneys on well-and-septic properties along the Salt River bottomlands take on more moisture and spalling than suburban brick a few miles north. Then there’s the heating season, roughly October through March, which gives a hard-working wood-burning flue plenty of time to load up creosote.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Shepherdsville Services
Two jobs bring most Shepherdsville homeowners to us, and they usually arrive in the same call.
Chimney Sweep in Shepherdsville
A sweep here is solid-fuel work, not a gas-appliance tune-up. Because so many Bullitt County homes burn wood as primary or backup heat, the flues we clean arrive loaded – heavy glazed creosote near the top, and sometimes third-degree creosote that needs chemical treatment before a brush touches it. We lay drop cloths, seal the opening, and run the brush and vacuum so the room stays clean, then give you a camera look at what came down. If your stovepipe to thimble connection looks loose or rusted, we’ll flag it the same visit. For a full Chimney Sweep in Shepherdsville, book before burning season starts.

Chimney Repair in Shepherdsville
Repair calls here usually trace back to two things: water and heat. Cracked crowns, spalling brick, and mortar joints that let moisture into an exterior masonry chimney through freeze-thaw cycles get the most attention. On older farmhouse chimneys with clay tile liners, we also see cracked tiles and gaps that a flexible stainless liner solves; on factory-built metal flues, it’s often a failed cap or a rusted section. Repair can also mean HeatShield resurfacing rather than a full reline, and we’ll tell you which your flue actually needs. Reach us for Chimney Repair in Shepherdsville.

Chimney Inspection in Shepherdsville

If you burn wood through a Bullitt County winter, an annual inspection is the cheapest insurance on the property. Shepherdsville’s long heating season pushes solid-fuel flues to accumulate creosote fast, and a humid summer followed by freeze-thaw winter is hard on exterior masonry crowns and joints. Our Chimney Inspection is what catches both problems while they’re still small, before a flue that looks fine from the living room turns into a repair bill. The split between century-old brick and factory-built metal means every Shepherdsville route is a different inspection – so we bring a camera on every call.
Fireplace Inspection
Signs you need it
You get smoke spill into the room, a draft that fades, or you haven’t had the fireplace opened up since moving in.
What it costs in Shepherdsville
A fireplace inspection typically runs $99 to $199 for a single appliance, and a full Level 1 plus Level 2 combination runs $199 to $499.
How we do it
We check the firebox, damper, smoke chamber, and flue with the camera, watch the draft, and give you a written condition report with photos.
Chimney Fire
Signs you need it
A roaring sound, a cracked or discolored flue, or a neighbor who saw flames or dark smoke at the top of the stack means a fire has already burned inside the chimney.
What it costs in Shepherdsville
The inspection and evaluation after a suspected chimney fire typically runs $199 to $499, and any creosote or flue repair is quoted separately once we see the damage.
How we do it
We stop using the fireplace, inspect the flue with the camera for cracked tiles or warped metal, document damage in photos, and tell you plainly whether the flue can be swept and returned to service or needs repair first.
A chimney fire in a wood stove tied into an old clay tile liner can crack the tile and open a path between the flue and the structure of the house. That’s why we don’t take a “roar and gone” fire lightly, and why the camera matters more than the eye after one.
Level 2 Chimney Inspection
Signs you need it
A chimney fire, a change of appliance or fuel, a home sale, or a flue that’s never had a camera run through it all call for Level 2.
What it costs in Shepherdsville
A Level 2 inspection with camera typically runs $199 to $499, with a full Level 1 plus Level 2 combination also in the $199 to $499 range.
How we do it
We inspect the accessible parts of the chimney and connected appliance, run the camera the full length of the flue, check the crown, cap, and flashing, and document everything in a photo report you keep.
What Chimney Inspection Costs in Shepherdsville
| Item | Typical range in Shepherdsville |
|---|---|
| Fireplace inspection (single appliance) | $99 – $199 |
| Level 2 chimney inspection with camera | $199 – $499 |
| Level 1 plus Level 2 combination | $199 – $499 |
What moves an inspection toward the top of that range in Shepherdsville is reach: a steep roof or a tall exterior chimney takes more time and equipment, and a post-fire inspection takes longer than a routine one. The written estimate sets the final price before we start.
Do I need a Level 2 inspection if I’ve never had a chimney fire?
Not always. A routine annual flue check is often Level 1. A Level 2 with camera is worth it after a chimney fire, a change of appliance, a home purchase, or any flue that’s never been scoped. Ask your insurer which one applies.
Can you tell me whether my liner needs relining or just resurfacing?
Yes, and that’s the point of a camera inspection. If the clay tiles are cracked or the joints are open, a DuraFlex flexible stainless liner replaces the flue. If the flue is sound but pitted, HeatShield ceramic resurfacing can often restore it without a full reline. We tell you which after seeing the footage.
Brands We Service in Shepherdsville
We name the brands we use, because what goes into your chimney matters as much as the labor. That means DuraFlex flexible liners for relining aging or irregular flues, HeatShield for ceramic resurfacing, and Olympia Chimney, Famco, and Copperfield for caps, dampers, and venting components. See our brands for the full picture. Turnaround depends on the part, and we’ll tell you the timeline before we order.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Shepherdsville, KY
| Service | Typical range in Shepherdsville |
|---|---|
| Fireplace inspection (single appliance) | $99 – $199 |
| Level 2 chimney inspection with camera | $199 – $499 |
| Level 1 plus Level 2 combination | $199 – $499 |
| Chimney sweep (standard single flue) | $99 – $249 |
| Chimney sweep with heavy creosote treatment | $149 – $349 |
| Chimney crown repair or rebuild | $199 – $899 |
| HeatShield ceramic resurfacing | $499 – $1,499 |
| Flexible stainless reline (DuraFlex type) | $1,499 – $3,499 |
| Chimney cap replacement | $199 – $499 |
| Post-fire inspection and evaluation | $199 – $499 |
Two things push price up on a Shepherdsville chimney: heavy glazed creosote that needs treatment before a sweep does any good, and water damage to exterior masonry that’s been working on a crown or mortar joints through years of freeze-thaw. None of it is quoted by phone – we inspect, then put a flat price in writing and honor it.
Neighborhoods We Serve in Shepherdsville
We work across Shepherdsville and the surrounding Bullitt County roads, from the older blocks near downtown and around the 40165 corridor to the rural subdivisions and acreage lots out toward the Salt River bottomlands. Housing varies enough that we bring a full kit on every trip – a brick farmhouse with a clay tile liner and a manufactured home with a factory-built metal flue can both show up on the same route. One scheduling note: because rural properties take longer to reach and set up, we book a Shepherdsville inspection by appointment rather than a fixed arrival window, and you’ll get a clear time when you book.
- Downtown Shepherdsville
- The 40165 corridor
- Rural subdivisions off the Salt River bottomlands
- Acreage properties toward the Bullitt County line
Service Area – Cities Near Shepherdsville
We serve homeowners across Bullitt and Jefferson County, and Shepherdsville is central to that work. Just north on I-65 is Louisville, KY, where the mix of homes runs more suburban and gas-appliance than it does here. To the east is Mount Washington, KY and to the west Hillview, KY, both with their own share of rural wood-burning properties. Southwest of us is Shively, KY. If you’re in any of these cities and burn wood, the same annual sweep rule applies.
Serving Shepherdsville, KY – Our Local Coverage Area
We serve Shepherdsville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Shepherdsville
Yes. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 473-9926 for an exact quote – estimates are free.
Sometimes. A full reline or structural rebuild may require a permit from the Bullitt County or Shepherdsville code office, while a simple cap or crown repair usually doesn’t. We’ll tell you when a permit applies before work starts, and it’s worth confirming with the local building department yourself.
Yes. Acreage lots, well-and-septic properties, and manufactured homes on the edge of Shepherdsville are all part of our regular work. Rural properties mean longer reach and setup, so we schedule a clear time when you book rather than a two-hour window. Call (855) 473-9926 for an exact quote – estimates are free.
If your Shepherdsville home has a wood-burning fireplace, insert, or stove, the right first step is a camera inspection and a sweep booked before October. We name the brands, we show you the footage, and we say plainly when work can wait. Call (855) 473-9926 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Shepherdsville Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Kelly Vaughn"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Shanice Bryant"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Tracy Sutton